3 Series E91 318i (N46T) TOUR
11 12 101
Replacing cylinder head gasket (N46T)
Necessary preliminary tasks:
•
Remove cylinder head.
•
Mill cylinder head sealing face.
•
Check cylinder head for water leaks.
Note:
A cylinder head seal 0.3 mm thicker than usual can be obtained
for machined (milled) cylinder heads.
Assemble engine.
RA Replacing cylinder head gasket (N46T)
BMW AG - TIS
21.01.2013 20:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -