3 Series E91 318i (N46T) TOUR
Note:
For use on the N45T / N46T engine, special tool 11 6 380 must
be remachined according to sketch with a 6.2 mm dia. drill bit to
a depth of A = approx. 45 mm.
This modification has already been taken into account for
reordering.
Press on valve stem seal with special tool 11 6 380 by hand up
to stop.
Assemble engine.
RA Replacing all valve stem seals - cylinder head removed (N46T)
BMW AG - TIS
21.01.2013 21:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -