3 Series E91 318i (N46T) TOUR
Release screw (1).
Installation:
Replace aluminium screws.
Tightening torque 12 41 1AZ
.
Release screw (2).
Installation:
Replace aluminium screws.
Tightening torque 12 41 2AZ
.
Remove starter motor (3).
Installation:
Check starter pinion and ring gear for damage, replace starter
motor if necessary.
RA Removing and installing/replacing starter (N43, N45, N46)
BMW AG - TIS
21.01.2013 21:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -