3 Series E91 318i (N46T) TOUR
![background image](/bmw/3_Series_E91/318i_N46T_TOUR/page-940001.png)
51 45 380
Removing and installing (replacing) right
decorative strip on instrument panel
Special tools required:
•
00 9 317
Important!
Risk of damage!
Do not turn special tool 00 9 317 when levering out and
pay attention to pressure points.
Lever out right decorative strip (2) from left side beginning at
retaining points (1) with special tool
00 9 317 .
Disconnect associated plug connection and remove decorative
strip (2).
Installation:
Clips (1) must be seated in associated mountings.
If necessary, remove clips (1) remaining on decorative strip.
Replace damaged clips (1):
A
Turn clip (1) with screwdriver to left by approx. 90
°
.
B
Lever out clip (1) from below.
Replacement:
•
Remove Start/Stop switch
•
Remove switch for hazard warning system /central locking
•
Remove right fresh-air grill
•
Remove center fresh air grill
RA Removing and installing (replacing) right decorative strip on instrument panel
BMW AG - TIS
22.01.2013 01:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -