3 Series E91 320d (M47T2) TOUR
Release screws and remove reinforcement plate.
Unfasten screws.
Illustration shows exhaust system removed:
Cutting line between centre muffler (2) and rear muffler (1).
Determine pipe length on new centre muffler (2).
Carry over measurement to faulty centre muffler (2) and mark
cutting lines.
Cut exhaust pipe with special tool 00 2 210 at marked points.
Remove centre muffler.
Deburr exhaust pipe.
RA Replacing centre muffler (M47T2)
BMW AG - TIS
22.01.2013 15:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -