3 Series E91 320i (N43) TOUR
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
Note:
Picture shows N46T.
Important!
When removing and installing pistons, make sure the spray
nozzles (1) for piston cooling are not incorrectly adjusted
(risk of damage).
Release connecting rod bolts (1).
Remove conrod bearing cap (2).
Insert special tool 11 8 330 in conrod.
Press out conrod with piston to cylinder head side.
RA Removing and installing/replacing all pistons (N43)
BMW AG - TIS
24.01.2013 07:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -