3 Series E91 320i (N43) TOUR
11 42 020
Removing and installing/replacing full-flow oil
filter (N43)
Special tools required:
•
11 9 240
Necessary preliminary tasks:
•
Drain coolant from radiator.
•
Remove suction filter housing.
Important!
Protect alternator against engine oil.
Cover alternator with suitable apparatus. (Risk of damage).
Pull out lock (1).
Detach water hoses from oil-water heat exchanger.
Remove cap from full-flow oil filter with special tool 11 9 240 .
Remove oil filter element.
This task is described in the section BMW engine oil service.
RA Removing and installing/replacing full-flow oil filter (N43)
BMW AG - TIS
24.01.2013 07:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -