3 Series E91 320i (N43) TOUR
Unlock plug (1) and remove.
Lower transmission at rear.
Disconnect sensor cable.
This work step is described in the section "Removing automatic
transmission".
Important!
Do not remove transmission!
Disconnect plug connection (1).
Unlock circlip in direction of arrow and detach plug (1) in direction
of arrow.
Unclip wiring harness from transmission and feed out towards
front.
RA Replacing section of wiring harness for transmission/lambda control (N43)
BMW AG - TIS
24.01.2013 08:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
