3 Series E91 320i (N43) TOUR
Tighten down bolts of high-pressure pump (1).
Note:
•
Evenly tighten bolts alternately to avoid the high-pressure
pump twisting!
•
Tightening torque 13 51 1AZ
.
Tighten bolts of high-pressure rail (1) in illustrated sequence.
Tightening torque 13 53 6AZ
.
Tighten nuts of delivery line (1) in illustrated sequence.
Tightening torque 13 53 4AZ
.
Tighten nuts of delivery lines (1) with special tool 37 1 151 in
illustrated sequence.
Note:
•
Hold hexagon of fuel injector while tightening (see following
illustration R13 14 - 93)
RA Removing and installing or replacing high-pressure rail (N43)
BMW AG - TIS
24.01.2013 08:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -