3 Series E91 320i (N43) TOUR
Important!
Adhere to conditions of absolute cleanliness when working on
the high-pressure fuel system.
Introduced contaminants can cause malfunctions in the
system!
•
Do not allow any dirt particles or foreign bodies to get
into the system.
•
Remove all traces of dirt before removing pipes or
individual components.
•
Use only fluff-free cloths.
•
Seal all fuel system openings with protective caps or
plugs.
Necessary preliminary tasks:
•
Remove pressure line
•
Remove all pressure lines
Recycling:
Fuel escapes when fuel lines are detached.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Unclip cable holder (1).
Unlock connector (2) and remove.
Release screws and remove high-pressure rail (3).
RA Removing and installing or replacing high-pressure rail (N43)
BMW AG - TIS
24.01.2013 08:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
