3 Series E91 320i (N43) TOUR
Unlock bearing pin (1) in direction of arrow and remove.
Lift out shift arm (1).
Installation:
Grease bearing pin.
Grease,
Refer to BMW Service Operating Fluids.
Release screws.
Tightening torque: 23 00 1AZ.
Important!
Do not suspend the transmission from the transmission input
shaft during removal and installation as this will deform the
clutch plate. Pull out transmission towards rear and remove.
Installation:
Check dowel sleeves (1 and 2) for correct seating.
Replace damaged sleeves.
Ensure correct position of cover plate.
RA Removing and installing transmission (GS6-17BG) N43
BMW AG - TIS
24.01.2013 09:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -