3 Series E91 320i (N43) TOUR
•
Unlock and disconnect plug (1) by turning.
•
Do not touch pins.
•
Release cable from retainers.
•
Insert special tool 24 2 390 in sealing sleeve.
Operations are described in
Notes on mechatronics
Important!
Read and comply with important note.
Release screws.
Tightening torque: 24 00 1AZ
.
Installation:
Hole (1) of drive plate must be accessible from opening on
engine oil sump. Check dowel sleeves for correct seating.
Replace damaged dowel sleeves.
Installation:
Rotate torque converter until bore in torque converter is flush with
bore in driving disc.
Flange automatic transmission to engine.
RA Removing and installing automatic transmission (6HP19Z) N43
BMW AG - TIS
24.01.2013 09:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
