3 Series E91 320i (N43) TOUR
Tightening torque 32 31 1AZ
.
Detach lower section of steering spindle from steering column.
Installation:
Lower section of steering spindle can only be attached in one
position to the steering column.
After installation:
•
Turn steering wheel in both directions to full lock. The airbag
warning lamp must not light up in the process.
•
Carry out steering angle sensor adjustment/adjustment for
active front steering
•
Check directional stability of car
RA Removing and installing / replacing lower section of steering spindle
BMW AG - TIS
24.01.2013 10:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -