3 Series E91 320i (N43) TOUR
Disconnect plug connection (1).
Release hose clamp (2) and detach suction line from power
steering pump.
Installation:
Markings (3) on suction line and vane pump connection must
match up.
Release banjo bolt (4) and disconnect pressure line.
Installation:
Replace all sealing rings.
Make sure pressure line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 8AZ
.
Release screw (1) and remove spacer (2) with coolant hose.
Installation:
Hook (3) must be situated as pictured in opening of power
steering pump holder.
Tightening torque 32 41 5AZ
.
Release bolts (1) and remove power steering pump (2).
Installation:
Tightening torque 32 41 5AZ
.
RA Removing and installing/replacing power steering pump for power steering gear wi
BMW AG - TIS
24.01.2013 10:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
