3 Series E91 320i (N43) TOUR
51 13 316
Removing and installing/replacing trim strip
on roof gutter at left or right
Special tools required:
•
00 9 317
Important!
Make sure that body is not damaged.
Open doors and, starting at front, release trim strip (1) with
special tool 00 9 317 from clips (2).
Installation:
To avoid leaks and noises, check all clips (2) for visible damage.
If necessary, replace faulty clips (2).
Align clips (2) on body and fit trim strip (1).
Installation:
Seals (1) must not be damaged.
Important!
-
Carry trim strip by its middle section only (risk of damage)
-
Perform installation work with a second person helping
-
Prepositioning of trim strip
-
Ensure drip moulding runs parallel to side frame (risk of
breakage)
RA Removing and installing/replacing trim strip on roof gutter at left or right
BMW AG - TIS
24.01.2013 12:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -