3 Series E91 320i (N43) TOUR
Lower belt fitting with belt tensioner:
Illustration show removal of the left lower belt fitting; proceed in
the same way for the right fitting.
Unfasten plug connection (2) and disconnect.
Release screw (1).
Tightening torque 72 11 23AZ
.
Remove lower belt fitting (3).
Installation:
Pin (4) determines the installation position and prevents the lower
belt fitting (3) from turning.
Note:
Middle lower belt fitting (5) can only be removed in conjunction
with right lower belt fitting.
RA Removing and installing/replacing all rear lower belt fittings
BMW AG - TIS
24.01.2013 17:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -