3 Series E91 320i (N46) TOUR
Pull up timing chain and install both solenoid valves.
Pull up timing chain and install chain guide (1).
Note:
Chain guides (1 and 2) are locked in place with 4 lugs.
Carefully press chain guide (2) apart and install chain guide (1).
Install inlet and exhaust adjustment units.
Installation:
Replace sealing ring on drain plug.
Tightening torque of drain plug 11 11 5AZ
.
Installation:
Vent cooling system and check for leaks.
Assemble engine.
RA Removing and installing/sealing cylinder head (N42)
BMW AG - TIS
25.01.2013 06:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -