3 Series E91 320i (N46) TOUR
Release gaiter (1) with screwdriver from groove (2) and pull off
over longitudinal splines.
Installation:
Apply an even coating of grease to longitudinal splines on shaft.
Grease, refer to BMW Service Operating Fluids.
Observe markings and force front propeller shaft onto longitudinal
splines (markings must be flush).
Push gaiter (1) during installation into groove (2) and make sure
it is firmly seated.
RA Replacing centre mount gaiter
BMW AG - TIS
25.01.2013 08:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -