3 Series E91 320i (N46) TOUR
Installation:
Windscreen wiper motor must be in its rest position.
Observe adjustment dimensions.
Adjust position of relevant windscreen wiper arm (measured
between windscreen wiper blade and trim panel on cowl panel at
height of windscreen wiper arm locator).
Tighten down windscreen wiper arm and check adjustment
dimensions of respective windscreen wiper arm again.
Check and if necessary adjust contact angle.
RA Removing and installing/replacing both windscreen wiper arms
BMW AG - TIS
25.01.2013 14:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -