3 Series E91 320i (N46) TOUR
65 50 011
Removing and installing (replacing) video
module for on-board monitor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove luggage compartment floor trim
Note:
Follow instructions for handling optical fibres.
Disconnect plug connection (1).
Release screws (2) and remove bracket (3) with video module.
RA Removing and installing (replacing) video module for on-board monitor
BMW AG - TIS
25.01.2013 16:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
