3 Series E91 320i (N46T) TOUR
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
Important!
When removing and installing pistons, make sure the spray
nozzles (1) for piston cooling are not incorrectly adjusted
(risk of damage).
Release connecting rod bolts (1).
Remove conrod bearing cap (2).
Screw special tool 11 8 330 (matching M8 E10 A/F conrod
bolts only) into conrod.
Press out conrod with piston to cylinder head side.
RA Removing and installing/replacing all pistons (N46T)
BMW AG - TIS
26.01.2013 06:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -