3 Series E91 320i (N46T) TOUR
Note:
Illustration with engine removed.
Rotate eccentric shaft (1) at hexagon as shown in illustration.
Pretension torsion spring (2) with a cable strap (1) and carefully
fit on roller (3).
Rotate eccentric shaft (1) at hexagon as shown in illustration.
Place special tool 11 9 292 on inlet camshaft and align inlet
camshaft so that special tool 11 9 292 rests without a gap on
cylinder head.
RA Removing and installing/replacing intermediate levers (N46T)
BMW AG - TIS
26.01.2013 06:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 15 -