3 Series E91 320i (N46T) TOUR
Release screw (2).
Important!
CCW thread!
Release nut (1) on oil pump sprocket wheel.
Installation:
Tightening torque 11 41 2AZ .
Push clamping rail (4) towards rear and secure with special tool
11 3 340 .
Release screw connection (3) of guide rail to oil pump.
Note:
Chain tensioner (1) is secured with a pin (2).
Detach chain tensioner (1) from locking pin (2).
Press lug (1).
Pull guide rail (2) downwards.
Remove sprocket wheel (3) from oil pump drive shaft.
RA Removing and installing/replacing chain tensioner for oil pump drive (N46T)
BMW AG - TIS
26.01.2013 06:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -