3 Series E91 320i (N46T) TOUR
11 66 000
Removing and installing/replacing vacuum
pump (N46T)
Necessary preliminary tasks:
•
Press brake pedal several times to reduce vacuum in brake
booster.
•
Remove microfilter box.
Release screws and remove vacuum pump (1).
Tightening torque: 11 66 1AZ
.
Note:
For purposes of clarity, this work step is shown on the engine after
it has been removed.
Installation:
Replace sealing ring (2).
Drive (1) must be turned into correct position prior to installation.
Note:
For purposes of clarity, this work step is shown without the
cylinder head cover.
Align drive (1) of vacuum pump to groove (2) of exhaust
camshaft.
RA Removing and installing/replacing vacuum pump (N46T)
BMW AG - TIS
26.01.2013 06:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -