3 Series E91 320i (N46T) TOUR
Important!
Handle clutch plate with care. Do not touch surfaces of friction
linings.
Install clutch plate (1) in correct position.
Pay attention to text "engine end" / "transmission side".
Centre clutch plate (1) with special tool 21 2 250 .
Push SAC clutch onto dowel pins (1) located in flywheel and
screw down.
Tightening torque, 21 21 1AZ
.
Important!
Locking piece (1) may only be removed with SAC clutch
screw-mounted!
RA Removing and installing/replacing clutch (SAC 228 N45/N46/N45T/N43/N46T)
BMW AG - TIS
26.01.2013 07:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -