3 Series E91 320i (N46T) TOUR
Remove retaining ring (1) with a suitable tool (2).
Attach special tool 24 2 354 to drive shaft (1).
Screw in special tool 24 2 351 until it is firmly connected with
shaft seal.
Screw in special tool 24 2 352 to remove shaft seal.
Oil sealing lip on shaft seal.
Drive in shaft seal (1) with special tool 24 2 360 as far as it will
go.
RA Replacing torque converter shaft seal (GA6L45R)
BMW AG - TIS
26.01.2013 08:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -