3 Series E91 320i (N46T) TOUR
51 24 004
Adjusting rear lid lock
Prerequisite:
Rear lid must be correctly adjusted to fit; if necessary, adjust rear
lid.
For ideal adjustment, refer to Body gap dimensions.
Release protective cap (1) on left/right.
Screw in bump stops (2) fully on left/right.
Unclip cover (1) towards top and remove.
Slacken screws (1) until striker (2) can still just be moved and
centres itself.
Important!
Striker (2) must not brush against upper rear lid lock section.
RA Adjusting rear lid lock
BMW AG - TIS
26.01.2013 12:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -