3 Series E91 320i (N46T) TOUR
Note:
Start by unclipping door trim panel (2) at bottom.
Unclip clips (1) for door trim panel (2) with special tool
00 9 317 .
Carefully unclip door trim panel (1) at top from retainers (2).
Unhook Bowden cable (1) from door lock (2).
Disconnect all plug connections and remove door trim panel.
Installation:
If necessary, replace faulty clips.
Fit all clips with sealing ring.
Make sure clips are installed in correct position.
1
Grey clip
2
White clip
US/CND version:
Crashpad (3) must be correctly fitted.
(see Replacing door trim panel)
RA Removing and installing left or right front door trim panel
BMW AG - TIS
26.01.2013 12:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -