Removing and installing fuse box interior (up to 03_2007)
61 13 050
Removing and installing (replacing) fuse box
interior (up to 03/2007)
Important!
Read and comply with notes on handling wiring harnesses
and cables.
Necessary preliminary tasks:
•
Remove right glovebox with housing
•
Remove Junction box
Unclip covers (3) and release nuts underneath. Tightening
torque 61 13 1AZ
. Remove battery positive lead from fuse box
interior.
Disconnect plug connection (2).
Release screws (1).
Fold fuse box interior forwards.
Disconnect all plug connections (1) on reverse side of fuse box
interior (2).
Installation:
Make sure wiring harnesses are correctly laid and plug
connections (1) are correctly engaged.
RA Removing and installing (replacing) fuse box interior (up to 03/2007)
BMW AG - TIS
26.01.2013 14:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -