3 Series E91 320i (N46T) TOUR
61 31 054
Removing and installing/replacing centre
console switch cluster (with CCC/ASK)
Necessary preliminary tasks:
•
Remove decorative strip on instrument panel on right
•
Remove operator unit for heater/air conditioner
Unclip trim (3) at fastening points (1) and (2).
Feed out associated ribbon cable and remove trim (3) complete
with centre console switch cluster (4).
Replacement:
Unclip centre console switch cluster (1) at fastening
points (2) and (4) and remove.
Note:
Ribbon cable (3) of centre console switch cluster (1) leads to
heater/air conditioner operator unit.
Installation:
Make sure centre console switch cluster (1) engages correctly in
upper fastening points (4) and lower fastening points (2).
RA Removing and installing/replacing centre console switch cluster (with CCC/ASK)
BMW AG - TIS
26.01.2013 15:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -