3 Series E91 320i (N46T) TOUR
Note:
Secure drive for slide/tilt sunroof (3) against falling out.
Unlock plug connections (1) and disconnect.
Release screws (2).
Remove control unit for slide/tilt sunroof (3).
Installation:
•
Initialise slide/tilt sunroof.
Replacement:
Carry out programming/coding.
Important!
There is a risk of permanent battery discharge if
programming/coding is not carried out!
RA Removing and installing/replacing control unit for slide/tilt sunroof
BMW AG - TIS
26.01.2013 15:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -