3 Series E91 320i (N46T) TOUR
64 11 806
Removing and installing/replacing servodrive
for fresh-/recirculated-air flap
Important!
Servomotors must be re-addressed in the event of
replacement!
Addressing can only be carried out with the BMW diagnosis
system.
Service functions:
-
Body
-
Heating and A/C function
-
Flap motors
-
Re-address flap motors
Necessary preliminary tasks:
•
Remove right glovebox with housing
Unfasten plug connection (1) and disconnect.
Release screws (2).
Detach servodrive for fresh-/recirculated-air flap (3) in direction of
arrow from heater/air conditioner.
Installation:
Place servodrive for fresh-/recirculated-air flap (3) exactly on
associated gear teeth.
RA Removing and installing/replacing servodrive for fresh-/recirculated-air flap
BMW AG - TIS
26.01.2013 16:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -