3 Series E91 320i (N46T) TOUR
64 31 092
Removing and installing/replacing microfilter
housing (lower section)
Necessary preliminary tasks:
•
Remove upper section of microfilter housing
Release holder (1).
Release catches (3).
Remove right cover (2).
Installation:
Make sure right cover (2) is correctly seated.
Left cover (4) is removed in same way as right cover.
Also for E90:
Release cable holder (2) and remove hose (1) from cover (4).
Installation:
Make sure cable holder (2) and hose (1) are correctly seated in
opening (3).
Press detent lugs (3).
Release cable strip (1) in direction of arrow from lower section of
microfilter housing (2).
Installation:
Detent lugs (3) must not be damaged or missing.
Make sure cable strip is correctly seated.
RA Removing and installing/replacing microfilter housing (lower section)
BMW AG - TIS
26.01.2013 16:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -