3 Series E91 320i (N46T) TOUR
67 11 555
Removing and installing / replacing
servodrive for tank filler flap
Necessary preliminary tasks:
•
Remove right luggage compartment trim panel
Release retaining clips (1).
If necessary, unclip wiring harness fasteners (2).
Partially remove insulating mat (3).
Feed out emergency actuation pull strap (1) out of insulating mat.
Disconnect plug connection (2).
Slacken screws (3)
Feed servodrive (not visible) in direction of arrow out of retaining
plate (4) and remove.
Installation:
Adjust servodrive position by means of both elongated holes (3).
It must be possible to lock or unlock the fuel filler flap completely.
Carry out function check.
RA Removing and installing / replacing servodrive for tank filler flap
BMW AG - TIS
26.01.2013 17:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -