3 Series E91 320i (N46T) TOUR
72 11 041
Removing and installing/replacing front left or
right lower belt fitting (seat belt tensioner)
Necessary preliminary tasks:
•
Remove front seat
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Improper handling can lead to triggering of the pyrotechnical
seat belt tensioner or side airbag, resulting in injuries.
Switch off ignition!
Unfasten plug connection (1) and disconnect.
Unlock plug connection (3) and pull all plugs out of plug
housing (2).
Disconnect all cable straps.
Removing wiring harness.
Installation:
•
Replace cable straps
•
Wires must not be under tension
•
Plugs are coded and must be reinstalled in the correct
sequence in the plug housing
RA Removing and installing/replacing front left or right lower belt fitting (seat b
BMW AG - TIS
26.01.2013 17:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -