3 Series E91 320i (N46T) TOUR
84 11 519
Removing and installing or replacing eject
box
Special tools required:
•
00 9 340
Pull off gaiter (1) towards top.
Disconnect plug connection (2).
Unclip plug connection for antenna lead from mounting and
disconnect.
Snap out eject box (1) with special tool
00 9 340 on inner side
of trim (2).
Pull eject box (1) on inner side upwards slightly.
Snap out eject box (1) with special tool
00 9 340 on outer side
of trim (2).
Lift out eject box (1) and feed out wiring harness.
Installation:
Make sure wiring harness is correctly laid.
Eject box (1) must snap audibly into trim (2).
RA Removing and installing or replacing eject box
BMW AG - TIS
26.01.2013 17:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -