3 Series E91 323i (N52) TOUR
Release aluminium bolt (1) on right next to cable retaining plate.
Blue aluminium screws/bolts must be replaced.
Tightening torque 24 00 2AZ
.
Version 1:
Grip clamping sleeve (1).
Slacken nut (2).
Detach retainer (3) downwards using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever.
Version 2:
Move selector lever to "Park".
Release shift cable head (1) using a screwdriver from ball head
of shift lever.
Detach retainer (2) downwards using a screwdriver.
Slide cable (3) towards rear and disengaged in downward
direction.
Installation:
Adjust selector lever.
Supporting transmission:
Support with special tools 23 4 050 , 23 0 132 and 00 2 030 .
Tasks are described in Transmission bracket.
RA Removing and installing automatic transmission (6HP19Z) N52/N52K/N53
BMW AG - TIS
27.01.2013 21:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
