bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Back-up Aerial_antenna > < 1 RA Removing And Installing_replacing Roof-mounted Aerial_antenna
Page 1
background image

65 20 090

Removing and installing or replacing antenna
amplifier

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Remove rear spoiler

Remove cover (1).

Installation:

Make rubber grommets (2) are correctly seated.

Cover (1) must snap audibly into place.

Important!

Do not pull on ribbon cable. Correctly unlock and disconnect
plug connection.

 

Disconnect plug connection (1).

Release screws (2) and remove aerial/antenna amplifier (3).

RA  Removing and installing or replacing antenna amplifier

BMW AG - TIS

28.01.2013  08:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Back-up Aerial_antenna > < 1 RA Removing And Installing_replacing Roof-mounted Aerial_antenna