3 Series E91 323i (N52K) TOUR
Important!
Observe different screw lengths.
Installation location of screws (1 and 2) is specified by the
different bushing shapes.
Release screws in area (1).
Tightening torque 11 12 5AZ
.
Installation:
Replace aluminium screws.
Release threaded pin (2).
Tightening torque 11 12 5AZ
.
Installation:
Replace aluminium screws.
Installation:
Slotted sleeves (2) for guiding ignition coils in cylinder head
cover (1) must be replaced.
Remove slotted sleeves (2).
Installation:
Clean all sealing faces (1 and 2).
Important!
Do not use any metal-cutting tools.
Installation:
Replace gaskets (1 and 2) .
RA Removing and installing/sealing cylinder head cover (N52K)
BMW AG - TIS
29.01.2013 18:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -