3 Series E91 325xi (N52) TOUR
27 10 010
Removing and installing transfer case (ATC
300)
Special tools required:
•
00 2 030
•
23 4 050
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Important!
After completing work, check gear oil level and top up if
necessary.
Filler plug (1):
Tightening torque 27 00 11AZ
.
Gear oil level up to filler edge of filler plug (1).
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the transfer box!
Necessary preliminary tasks:
•
Remove underbody protection
•
Remove centre muffler (N53 only)
•
Remove complete exhaust system
•
Remove heat shields
RA Removing and installing transfer case (ATC 300)
BMW AG - TIS
09.02.2013 21:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -