3 Series E91 325xi (N52) TOUR
51 13 116
Removing and installing cowl panel cover
Necessary preliminary tasks:
•
Remove windscreen wiper arm on left/right
•
Remove microfilter housing
Important!
Danger of water ingress via fan into vehicle interior if cowl
panel cover and sealing strip are not correctly fitted.
Pull off hose (1).
Disconnect plug connections (2).
Detach mucket (3).
Take off cover (4).
Installation:
Make sure cover (4) is correctly seated.
Installation:
Sealing strip (1) must be fitted (water ingress)
If necessary, retrofit sealing strip (1).
RA Removing and installing cowl panel cover
BMW AG - TIS
10.02.2013 03:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -