3 Series E91 325xi (N52) TOUR
61 71 015
Removing and installing/replacing a spray
nozzle in windscreen washer system
Note:
The jet nozzles of the windscreen washer system are preset at the
factory and cannot be readjusted.
Necessary preliminary tasks:
•
Remove lower section of microfilter housing
Press detent lug (1).
Detach unlocked plug housing (2) in direction of arrow.
Detach hose (3) from spray nozzle.
Release spray nozzle (1) in direction of arrow from cowl panel
cover and remove.
Installation:
Make sure spray nozzle (1) is correctly seated.
RA Removing and installing/replacing a spray nozzle in windscreen washer system
BMW AG - TIS
10.02.2013 08:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -