3 Series E91 325xi (N52) TOUR
Slacken nut (1) until clamping jaw (2) on rear lid (3) can be
unlatched.
Tightening torque 63 21 1AZ
.
Fold rear light (4) outwards out of rear lid (3) and remove.
Installation:
Make sure clamping jaw (2) is correctly seated on rear lid (3).
Position lugs (5) of rear light (4) exactly over side edge of rear
lid (3).
Installation:
Make sure seal (1) is correctly seated on rear light (2).
Replacement:
If necessary, remove bulbs.
RA Removing and installing/replacing left or right tail light (on rear lid)
BMW AG - TIS
10.02.2013 09:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -