3 Series E91 325xi (N52) TOUR
67 66 010
Removing and installing/replacing lumbar
support drive mechanism on front seat, left or
right
Necessary preliminary tasks:
•
Remove rear panel on front seat backrest
Disconnect plug connection (1).
Remove drive unit for lumbar support (2) with jacket from
backrest frame and expose.
Installation:
Make sure drive unit for lumbar support (2) is in correct
installation position.
Detach hose (1) from drive unit (2).
Note:
Gently heat hose (1) if stuck.
Installation:
Hose (1) on drive unit (2) must not be kinked.
Pull jacket (3) off drive unit (2).
Remove drive unit for lumbar support (2).
RA Removing and installing/replacing lumbar support drive mechanism on front seat,
BMW AG - TIS
10.02.2013 11:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -