3 Series E91 325xi (N52K) TOUR
11 00
Removing and installing/replacing ignition
coil cover (N52K)
Necessary preliminary tasks:
•
Remove microfilter housing
Release screws (arrow).
Tightening torque 11 12 6AZ
.
Remove ignition coil cover (1) towards top.
Note:
For purposes of improved clarity, picture and descriptions show
wiring harness and tension strut removed.
RA Removing and installing/replacing ignition coil cover (N52K)
BMW AG - TIS
11.02.2013 08:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
