3 Series E91 325xi (N52K) TOUR
51 24 130
Removing and installing/replacing striker for
rear lid lock
Snap out cover (1) and lift out.
Installation:
Make sure spring (1) is correctly seated.
Catches (2) must not be damaged
Unfasten screws (1) and remove striker (2).
Tightening torque 51 24 2AZ
.
Installation:
Adjust striker.
RA Removing and installing/replacing striker for rear lid lock
BMW AG - TIS
11.02.2013 18:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -