3 Series E91 330d (M57T2) TOUR
11 12 100
Removing and installing cylinder head
(M57T2)
Special tools required:
•
00 9 120
•
11 6 050
Necessary preliminary tasks:
•
Remove cylinder head cover
•
Drain coolant
•
Remove A/C compressor drive belt
•
Remove alternator drive belt
•
Remove vacuum pump
•
Remove camshafts
Important!
Fit new cylinder head screws.
Do not wash off bolt coating.
There must be no oil or coolant in the pocket holes (risk of
cracking).
Protect alternator against engine oil and coolant. (Risk of
damage).
Cover alternator with suitable apparatus.
Assemble charge air hoses without grease and dry.
Slacken bolts (1) and (2) on turbocharger (3).
RA Removing and installing cylinder head (M57T2)
BMW AG - TIS
17.02.2013 17:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -