3 Series E91 330d (M57T2) TOUR
Slacken clamp (1) and release turbocharger from exhaust
manifold.
Installation:
Replace clamp.
Release screws (3) on cylinder head at rear.
Remove all finger rockers (1) and set down in order.
Remove all compensating elements (2) and set down in order.
Important!
Worn rockers may only be reused on the same grooves of the
camshaft.
Release screws (1).
RA Removing and installing cylinder head (M57T2)
BMW AG - TIS
17.02.2013 17:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
