3 Series E91 330d (M57T2) TOUR
11 23 010
Removing and installing/replacing vibration
damper (M57T2)
Special tools required:
•
11 8 182
•
11 8 183
Necessary preliminary tasks:
•
Remove fan cowl
•
Remove fan
•
Remove A/C compressor drive belt
•
Remove alternator drive belt
Convert special tool 11 8 183 to transmission (HP 26).
Detach exhaust system bracket (1) from transmission.
Mount special tool 11 8 183 and 11 8 182 on transmission
screws (2).
Adjust special tool 11 8 182 at flywheel toothing (3).
Release screws (1).
Remove vibration damper (2).
Tightening torque 11 23 2AZ
.
Installation:
Replace screws.
Tighten screws crosswise.
RA Removing and installing/replacing vibration damper (M57T2)
BMW AG - TIS
17.02.2013 17:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -