3 Series E91 330d (M57T2) TOUR
Release sprocket wheel bolts (1).
Release bearing pins (2) of guide rails.
Installation:
Replace bearing pins (2).
Release sprocket wheel with chain (1) from inlet camshaft in
direction of arrow.
Release guide rail (2) from mounting and pull out in direction of
arrow.
Remove sprocket wheel (2) in direction of arrow to right from
timing chain (3) and remove towards top.
Release screws (1) of camshaft bearing cap in 1/2 turn
increments evenly from outside to inside.
RA Replacing camshafts (M57T2)
BMW AG - TIS
17.02.2013 17:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
